Comments on the article ‘Comparison of calculations for interplanar distances in a crystal lattice’, by Ying Liu,Yue Liu & Michael G. B. Drew

Some statements in the review by Liu et al. [Liu Y, Liu Y, Drew GB. Comparison of calculations for interplanar distances in a crystal lattice. Cryst Rev. 2017] are corrected. The role of metric tensor to simplify calculations of interplanar spacings in crystal lattices is emphasized.     

Synthesis and characterization of nanocomposites of thermoplastic polyurethane with both graphene and graphene nanoribbon fillers

Thermoplastic polyurethane (TPU) nanocomposites containing graphene and graphene nanoribbons were obtained by polymerizing 1,4-butanediol with two diisocyanates (namely, 1,6-hexane diisocyanate or isophorone diisocyanate), in which the nanofillers were previously dispersed. Raman spectroscopy and Transmission Electron Microscopy demonstrated the formation of few-layer graphene and graphene nanoribbons dispersed in the monomers. At variance to the methods commonly reported in literature, that used in this work consists of the direct exfoliation of graphite without any chemical manipulation. Apart from the obvious cost and ease advantages, the so-obtained graphene does not contain any carboxy or alkoxy groups formed during the exfoliation process, which, at variance, are typically present in the most commonly reported methods. This finding paves the way toward the large-scale production of graphene and its nanoribbons, which are considered even more interesting than graphene itself for many potential applications. The obtained nanocomposites show a peculiar thermal and rheological behavior due to the presence of the nanofillers and to their reinforcing or plasticizing effect exerted on the TPU matrices.     

Thermal instabilities in semiconductor amplifiers

We introduce here a model which includes the thermal dynamics in the time evolution of a semiconductor multiple quantum well microresonator, driven by a coherent holding beam. The active layer is electrically pumped, in order to obtain population inversion, but it is maintained below the lasing threshold. We show that the inclusion of thermal effects introduces a Hopf instability which may dominate the dynamical behaviour of the system in some operational regimes. In those cases our numerical simulations show that both spatial patterns and cavity solitons perform a drift motion in the transverse direction. This motion develops over the slow time scale which characterizes thermal effects.     

Optical properties of hybrid T3Pyr/SiO2/3C-SiC nanowires

A new class of nanostructured hybrid materials is developed by direct grafting of a model thiophene-based organic dye on the surface of 3C-SiC/SiO₂ core/shell nanowires. TEM-EDX analysis reveals that the carbon distribution is more spread than it would be, considering only the SiC core size, suggesting a main contribution from C of the oligothiophene framework. Further, the sulfur signal found along the treated wires is not detected in the as-grown samples. In addition, the fluorescent spectra are similar for the functionalized nanostructures and T3Pyr in solution, confirming homogeneous molecule grafting on the nanowire surface. Chemical and luminescence characterizations confirm a homogeneous functionalization of the nanowires. In particular, the fluorophore retains its optical properties after functionalization.     

A Structure-Properties Relationship Study of Self-Healing Materials Based on Styrene and Furfuryl Methacrylate Cross-Linked via Diels–Alder Chemistry

A series of copolymers of styrene and furfuryl methacrylate characterized by various molecular structures (linear and star, block and random) is synthesized via atom transfer radical polymerization, and cross-linked with a bismaleimide by means of thermally reversible Diels–Alder (DA) reaction, to obtain self-healing materials. The prepared materials are studied in terms of gelation, swelling, thermal, and dynamic-mechanical analysis, with the aim of correlating relevant properties to their chemical structure. It is found that the furan/styrene ratio, as well as the molecular architecture, have a major influence on the properties. It is also found that the reversibility of the DA reaction is not complete in the solid state for materials with high cross-linking density. This study provides some important tools for the design of materials characterized by thermally reversible behavior, which find usually application as self-healing thermosets, coatings, or adhesives.     

Structure–composition relationships of the traditional balsamic vinegar of Modena close to jamming transition (part II): Threshold control parameters

The Traditional Balsamic Vinegar of Modena (TBVM) is a high-valuable Italian specialty that, for reasons not yet fully explained, may undergo non-equilibrium degrading phenomena involving phase separation and flow arrest caused by solidification with or without crystalline order. TBVM was probed for its microstructure and composition as well as for its flow ability under low- and high shear limits. Results indicated vinegar concentration, temperature and viscosity as three independent variables affecting the extent of solidification in TBVM. Polymer-mediated mechanisms and diffusion-limited kinetics were hypothesized for structure development. Three main experimental evidences offered a convincing proof unifying all solidification phenomena observed in TBVM under the concept of colloidal jamming transition: (i) simultaneous presence of fractal-like aggregated colloids and polydispersed biopolymers; (ii) non-linear shear dependence above a critical level of vinegar concentration; (iii) a modified Krieger–Dougherty model satisfactorily described scaling behavior of relative viscosity accounting for the fractal dimension of jammed structure. Threshold for jamming in TBVM was defined in terms of critical concentration of the overall structure-active constituents (corresponding to 72°Bx and 40% w/w of the main sugars) and maximum resistance to the Newtonian flow (the onset for shear-thinning flow was achieved with a low-shear limiting viscosity of about 0.95 Pa·s).     

Heuristic approaches for the optimal wiring in large scale robotic skin design

This paper faces the problem of optimizing the wiring and the connections in a tactile skin for robots. The robotic skin is a device composed of a network of tactile sensors, whose wiring can be very complex: the control of this complexity is a key problem. In the considered robotic skin, skin elements are grouped into skin patches, which output tactile data that have to be read by a micro-controller. The logical connections between the sensors must be defined in order to route signals through the network. A finite set of micro-controllers is given and a set of constraints is imposed on the given assignment and routing. The considered problem has a combinatorial nature and it can be formulated as a Minimum Constrained Spanning Forest problem with costs on arcs that cannot be a priori defined as they are solution-dependent. The problem is NP-hard. The paper introduces a mathematical formulation and then proposes a Multi-Start Heuristic algorithm and an Ant Colony Optimization approach whose effectiveness is evaluated through experimental tests performed on both real and synthetically generated instances.